HACKINTOSH MONTRÉAL & FRANCE

Clover Créateur-V10 - Page 3 Capt1051
Vous devez lire la charte et vous présenter avant de poster!
➤  La Charte du Forum

➤  Présentation

Rejoignez le forum, c’est rapide et facile

HACKINTOSH MONTRÉAL & FRANCE

Clover Créateur-V10 - Page 3 Capt1051
Vous devez lire la charte et vous présenter avant de poster!
➤  La Charte du Forum

➤  Présentation
HACKINTOSH MONTRÉAL & FRANCE
Vous souhaitez réagir à ce message ? Créez un compte en quelques clics ou connectez-vous pour continuer.
Le deal à ne pas rater :
Aliexpress : codes promo valables sur tout le site
Voir le deal

Clover Créateur-V10

+4
MarioNonStop
arcade33
emax31
chris1111
8 participants

Page 3 sur 40 Précédent  1, 2, 3, 4 ... 21 ... 40  Suivant

Aller en bas

Clover Créateur-V10 - Page 3 Empty Clover Créateur-V10

Message par chris1111 Sam 25 Nov - 11:18

Rappel du premier message :

arcade33 a écrit:4319 ok Very Happy
4319:

Oui ok Smile ha1

4319:
Update 17 Nov 2017
Clover Créateur-V3.6
Option 1 Default EDK2 25623 Smile
Installation V3.6
Option 1 Very Happy

Option 1:

Clover Créateur-V3.6 +1 +1
1-5
CLOVER 4305 Very Happy Very Happy
NICKEL oui oui
4305:


Clover Revision
4316 OK
Very Happy
EDK2 Revision
25623

4316:


Dernière édition par chris1111 le Mar 30 Juil - 6:49, édité 8 fois
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas


Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Dim 31 Déc - 8:05

Clover Revision
4366
EDK2 Revision
25909
Option 3. 4, 5

4366:
Very Happy

chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Dim 7 Jan - 8:21

Tester le nouveau changement dans Clover a partir de r4369

Clover injecte maintenant la Nvram nativement sans Emuvariable Laughing
Re Edit ***
Bien sur il vous avoir OsxAptioFixDrv-64.efi
Si vous ne l'aviez pas, mettez le avant de tester et Rebooter le PC

Ceux qui utilise Emuv virer le drivers
Dans le terminal taper
sudo nvram test="value"
redémarrer votre machine
en revenant taper
sudo nvram -p

Voir si vous avez ceci
Clover Créateur-V10 - Page 3 Captu201

Si oui tout est bon pour vous  +1  ha1

Virer le test Value
sudo nvram -d test
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Dim 7 Jan - 9:53

chris1111 a écrit:Tester le nouveau changement dans Clover a partir de r4369

Clover injecte maintenant la Nvram nativement sans Emuvariable Laughing
Re Edit ***
Bien sur il vous avoir OsxAptioFixDrv-64.efi
Si vous ne l'aviez pas, mettez le avant de tester et Rebooter le PC

Ceux qui utilise Emuv virer le drivers
Dans le terminal taper
sudo nvram test="value"
redémarrer votre machine
en revenant taper
sudo nvram -p

Voir si vous avez ceci
Clover Créateur-V10 - Page 3 Captu201

Si oui tout est bon pour vous  +1  ha1

Virer le test Value
sudo nvram -d test

Post Editer plus haut


Bien sur il vous avoir OsxAptioFixDrv-64.efi
Si vous ne l'aviez pas, mettez le avant de tester et Rebooter le PC
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par arcade33 Dim 7 Jan - 11:04

moi je l'utilisais Very Happy Very Happy
sinon les web drivers n'étaient pas pris en compte ha3 pour ma GT 1030
encore un truc à moi Razz Razz Razz Clover Créateur-V10 - Page 3 1037447622 Clover Créateur-V10 - Page 3 1037447622
et maintenant ça fonctionne sans le EmuVariable tu tu tu

Code:
Last login: Sun Jan  7 17:54:23 on console
cathys-iMac:~ cathy$ sudo nvram -p
Password:
fakesmc-key-MSWr-ui8 %00
test value
fakesmc-key-RPlt-ch8* j16%00%00%00%00%00
fakesmc-key-RBr -ch8* j16j17%00%00
EFILoginHiDPI %00%00%00%00
fakesmc-key-#KEY-ui32 %00%00%00%12
fakesmc-key-BATP-flag %00
fakesmc-key-MSTc-ui8 %00
fakesmc-key-BNum-ui8 %00
security-mode none
csr-active-config %e7%03%00%00
fakesmc-key-$Num-ui8 %01
fakesmc-key-MSFW-ui8 %01%00
fakesmc-key-REV -ch8* %02%14%0f%00%00$
fakesmc-key-MSPS-ui16 %00%03
fmm-computer-name cathy%e2%80%99s iMac
backlight-level %ff%ff
bootercfg (%00
fakesmc-key-$Adr-ui32 %00%00%03%00
fakesmc-key-EPCI-ui32 %07%90%07%00
nvda_drv 1%00
fakesmc-key-MSAc-ui16 %00%00
fakesmc-key-MSLD-ui8 %00
fakesmc-key-RMde-char A
specialbootdevice %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%00%17%03%12%0a%00%02%00%ff%ff%00%00%04%01*%00%02%00%00%00(@%06%00%00%00%00%00%c0%c0%1a:%00%00%00%00%b5%ba%eb[%b8%d2%d2L%98%efU%ba%cfi%16%fd%02%02%7f%ff%04%00
flagstate %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
fakesmc-key-BBIN-ui8 %01
fakesmc-key-BEMB-flag %00
cathys-iMac:~ cathy$

_________________
mes configs:

si nous vous avons aidé faites des TUTOS de vos installations
merci d'avance
je ne réponds plus à ceux qui ne se sont pas présentés et mis matériel dans leurs profils
arcade33
arcade33
Souverain
Souverain

Date d'inscription : 27/10/2013
Age : 69
Localisation : LANGON 33 - FRANCE

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Dim 7 Jan - 11:11

arcade33 a écrit:moi je l'utilisais Very Happy Very Happy
sinon les web drivers n'étaient pas pris en compte ha3 pour ma GT 1030
encore un truc à moi Razz Razz Razz Clover Créateur-V10 - Page 3 1037447622 Clover Créateur-V10 - Page 3 1037447622
et maintenant ça fonctionne sans le EmuVariable tu tu tu

Code:
Last login: Sun Jan  7 17:54:23 on console
cathys-iMac:~ cathy$ sudo nvram -p
Password:
fakesmc-key-MSWr-ui8 %00
test value
fakesmc-key-RPlt-ch8* j16%00%00%00%00%00
fakesmc-key-RBr -ch8* j16j17%00%00
EFILoginHiDPI %00%00%00%00
fakesmc-key-#KEY-ui32 %00%00%00%12
fakesmc-key-BATP-flag %00
fakesmc-key-MSTc-ui8 %00
fakesmc-key-BNum-ui8 %00
security-mode none
csr-active-config %e7%03%00%00
fakesmc-key-$Num-ui8 %01
fakesmc-key-MSFW-ui8 %01%00
fakesmc-key-REV -ch8* %02%14%0f%00%00$
fakesmc-key-MSPS-ui16 %00%03
fmm-computer-name cathy%e2%80%99s iMac
backlight-level %ff%ff
bootercfg (%00
fakesmc-key-$Adr-ui32 %00%00%03%00
fakesmc-key-EPCI-ui32 %07%90%07%00
nvda_drv 1%00
fakesmc-key-MSAc-ui16 %00%00
fakesmc-key-MSLD-ui8 %00
fakesmc-key-RMde-char A
specialbootdevice %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%00%17%03%12%0a%00%02%00%ff%ff%00%00%04%01*%00%02%00%00%00(@%06%00%00%00%00%00%c0%c0%1a:%00%00%00%00%b5%ba%eb[%b8%d2%d2L%98%efU%ba%cfi%16%fd%02%02%7f%ff%04%00
flagstate %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
fakesmc-key-BBIN-ui8 %01
fakesmc-key-BEMB-flag %00
cathys-iMac:~ cathy$
Peut être que tu avait pas OsxAptioFixDrv-64.efi study

Clover Créateur-V10 - Page 3 3259054435 Clover Créateur-V10 - Page 3 1037447622

De toute façon si sa fonctionne normalement maintenant cest ce qui compte whistle+ 3079029344
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par arcade33 Dim 7 Jan - 11:23

si si j'avais Very Happy Very Happy
je sauvegarde toujours le dossier EFI avant de faire update
donc
AVANT
1:
APRES
2:

_________________
mes configs:

si nous vous avons aidé faites des TUTOS de vos installations
merci d'avance
je ne réponds plus à ceux qui ne se sont pas présentés et mis matériel dans leurs profils
arcade33
arcade33
Souverain
Souverain

Date d'inscription : 27/10/2013
Age : 69
Localisation : LANGON 33 - FRANCE

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Dim 7 Jan - 12:30

arcade33 a écrit:si si j'avais Very Happy Very Happy
je sauvegarde toujours le dossier EFI avant de faire update
donc
AVANT
1:
APRES
2:
Ce qui veut dire que ton Bios,( ta carte mere)  avait un petit problème Aptio Memory Smile
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par arcade33 Dim 7 Jan - 12:32

chris1111 a écrit:
arcade33 a écrit:si si j'avais Very Happy Very Happy
je sauvegarde toujours le dossier EFI avant de faire update
donc
AVANT
1:
APRES
2:
Ce qui veut dire que ton Bios,( ta carte mere)  avait un petit problème Aptio Memory  Smile
fort possible cat+ cat+

_________________
mes configs:

si nous vous avons aidé faites des TUTOS de vos installations
merci d'avance
je ne réponds plus à ceux qui ne se sont pas présentés et mis matériel dans leurs profils
arcade33
arcade33
Souverain
Souverain

Date d'inscription : 27/10/2013
Age : 69
Localisation : LANGON 33 - FRANCE

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Dim 7 Jan - 12:36

arcade33 a écrit:
chris1111 a écrit:
arcade33 a écrit:si si j'avais Very Happy Very Happy
je sauvegarde toujours le dossier EFI avant de faire update
donc
AVANT
1:
APRES
2:
Ce qui veut dire que ton Bios,( ta carte mere)  avait un petit problème Aptio Memory  Smile
fort possible cat+ cat+
Je suis bien content de ce changement surtout sur mon Portable qui devait utiliser au moins un fois Emuvariable pour avoir le fichier
Nvram.plist dans EFI Smile après je virait Emuvariable et maintenant même plus besoin de le mettre une fois :bravo:
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Dim 7 Jan - 21:13

@arcade33 il semble que AptioFix2 est le patch ha12 Je pense mavoir tromper mais sa marche pour moi
peut être  parce que nous avons les RC Script qui font fonctionner la NVRAM  ha26
Faudrait tester une install propre Sant les RC Script et choisir AptioFix2 .
dit moi  si sa marche Wink Je teste demain au reviel Smile

EDIT Je lai fait avant de me coucher lol! tu

sa fonctionne pour moi avec AptioFix2  et sans les RC Script  

Clover Créateur-V10 - Page 3 Captu204
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par emax31 Lun 8 Jan - 1:26

Fonctionne pour moi avec AptioFix2 mais j'ai les RC Script
NOK pour EDK2 Revision 26043

Clover Revision
4370
EDK2 Revision
25909
Option 3. 4, 5
4370:

_________________
 Thèmes  :



Important : Une fois résolu, l'auteur du sujet peut ajouter [Résolu] au début du titre en cliquant sur Editer de son premier message, et ajouter un bref récapitulatif de la solution à la fin de celui-ci ou mieux faire un tuto. Merci.
emax31
emax31
Gourou
Gourou

Date d'inscription : 04/12/2013
Localisation : Ariège - Grenoble - France

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par arcade33 Lun 8 Jan - 4:01

chris1111 a écrit:@arcade33 il semble que AptioFix2 est le patch ha12 Je pense mavoir tromper mais sa marche pour moi
peut être  parce que nous avons les RC Script qui font fonctionner la NVRAM  ha26
Faudrait tester une install propre Sant les RC Script et choisir AptioFix2 .
dit moi  si sa marche Wink Je teste demain au reviel Smile

EDIT Je lai fait avant de me coucher lol! tu

sa fonctionne pour moi avec AptioFix2  et sans les RC Script  

Clover Créateur-V10 - Page 3 Captu204
OK je fais une CLEAN INSTALL
et je te dis
Very Happy

_________________
mes configs:

si nous vous avons aidé faites des TUTOS de vos installations
merci d'avance
je ne réponds plus à ceux qui ne se sont pas présentés et mis matériel dans leurs profils
arcade33
arcade33
Souverain
Souverain

Date d'inscription : 27/10/2013
Age : 69
Localisation : LANGON 33 - FRANCE

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par arcade33 Lun 8 Jan - 4:03

Clover Revision
4370
EDK2 Revision
25909
OK
Very Happy

4370:

_________________
mes configs:

si nous vous avons aidé faites des TUTOS de vos installations
merci d'avance
je ne réponds plus à ceux qui ne se sont pas présentés et mis matériel dans leurs profils
arcade33
arcade33
Souverain
Souverain

Date d'inscription : 27/10/2013
Age : 69
Localisation : LANGON 33 - FRANCE

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par arcade33 Lun 8 Jan - 5:40

bon j'aI fait HIGH SIERRA HD
clover 4369 sans les scripts sur le volume de destination
mis OsxAptioFix2Drv-64.efi
et pour moi c'est bon Very Happy Very Happy
Code:
Last login: Mon Jan  8 12:29:12 on console
tests-Air:~ test$ sudo nvram -p
Password:
flagstate   %00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00%00
tbt-options   %04
fakesmc-key-MSWr-ui8   %00
fakesmc-key-RBr -ch8*   j110%003%00%00
fakesmc-key-EPCI-ui32   %07%b0%07%00
fakesmc-key-MSAc-ui16   %00%00
bootercfg   (%00
efi-apple-payload2-data   %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%00%00%00%00%00%00%04%01*%00%01%00%00%00(%00%00%00%00%00%00%00%00@%06%00%00%00%00%00%8du%97%a4}%da%d3F%9a%8dd%e4%a5[=:%02%02%04%04l%00\%00E%00F%00I%00\%00A%00P%00P%00L%00E%00\%00U%00P%00D%00A%00T%00E%00R%00S%00\%00M%00U%00L%00T%00I%00U%00P%00D%00A%00T%00E%00R%00\%00f%00l%00a%00s%00h%00e%00r%00_%00u%00p%00d%00a%00t%00e%00.%00s%00m%00c%00%00%00%7f%ff%04%00
Clover.MountEFI   Yes
fakesmc-key-BATP-flag   %00
efi-apple-payload0-data   %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%00%00%00%00%00%00%04%01*%00%01%00%00%00(%00%00%00%00%00%00%00%00@%06%00%00%00%00%00%8du%97%a4}%da%d3F%9a%8dd%e4%a5[=:%02%02%04%04d%00\%00E%00F%00I%00\%00A%00P%00P%00L%00E%00\%00U%00P%00D%00A%00T%00E%00R%00S%00\%00M%00U%00L%00T%00I%00U%00P%00D%00A%00T%00E%00R%00\%00S%00m%00c%00F%00l%00a%00s%00h%00e%00r%00.%00e%00f%00i%00%00%00%7f%ff%04%00
acpi-backlight-level   %00%04
fakesmc-key-$Num-ui8   %01
Clover.LogLineCount   500
LocationServicesEnabled   %01
fakesmc-key-REV -ch8*   %02&%0f%00%00%02
efi-apple-payload0   <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>A497758D-DA7D-46D3-9A8D-64E4A55B3D3A</string></dict></dict><key>BLLastBSDName</key><string>disk0s1</string></dict><dict><key>IOEFIDevicePathType</key><string>MediaFilePath</string><key>Path</key><string>\EFI\APPLE\UPDATERS\MULTIUPDATER\SmcFlasher.efi</string></dict></array>%00
bluetoothActiveControllerInfo   %114%d3%13%00%00%00%00%13%1a@%e20%92%ce.
fakesmc-key-MSLD-ui8   %00
fmm-computer-name   test%e2%80%99s MacBook Air
fakesmc-key-MSTc-ui8   %00
Clover.KeepBackupLimit   0
fakesmc-key-MSPS-ui16   %00%03
fakesmc-key-RMde-char   A
Clover.Theme   Movies
fakesmc-key-RPlt-ch8*   j110%00%00%00%00
csr-active-config   %e7%03%00%00
fakesmc-key-BEMB-flag   %01
efi-apple-payload1   <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>A497758D-DA7D-46D3-9A8D-64E4A55B3D3A</string></dict></dict><key>BLLastBSDName</key><string>disk0s1</string></dict><dict><key>IOEFIDevicePathType</key><string>MediaFilePath</string><key>Path</key><string>\EFI\APPLE\UPDATERS\MULTIUPDATER\flasher_base.smc</string></dict></array>%00
fakesmc-key-#KEY-ui32   %00%00%00%12
efi-apple-payload3-data   %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%00%00%00%00%00%00%04%01*%00%01%00%00%00(%00%00%00%00%00%00%00%00@%06%00%00%00%00%00%8du%97%a4}%da%d3F%9a%8dd%e4%a5[=:%02%02%04%04x%00\%00E%00F%00I%00\%00A%00P%00P%00L%00E%00\%00U%00P%00D%00A%00T%00E%00R%00S%00\%00M%00U%00L%00T%00I%00U%00P%00D%00A%00T%00E%00R%00\%00M%00a%00c%00-%009%00F%001%008%00E%003%001%002%00C%005%00C%002%00B%00F%000%00B%00.%00e%00p%00m%00%00%00%7f%ff%04%00
fakesmc-key-MSFW-ui8   %01%00
backlight-level   %10%07
security-mode   none
efi-apple-payload1-data   %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%00%00%00%00%00%00%04%01*%00%01%00%00%00(%00%00%00%00%00%00%00%00@%06%00%00%00%00%00%8du%97%a4}%da%d3F%9a%8dd%e4%a5[=:%02%02%04%04h%00\%00E%00F%00I%00\%00A%00P%00P%00L%00E%00\%00U%00P%00D%00A%00T%00E%00R%00S%00\%00M%00U%00L%00T%00I%00U%00P%00D%00A%00T%00E%00R%00\%00f%00l%00a%00s%00h%00e%00r%00_%00b%00a%00s%00e%00.%00s%00m%00c%00%00%00%7f%ff%04%00
specialbootdevice   %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%00%00%00%00%00%00%04%01*%00%02%00%00%00(@%06%00%00%00%00%00@%a5%d8%1b%00%00%00%00%f2%dfB%9c%e9o%d7B%84lo%c0%00%f2oH%02%02%7f%ff%04%00
test   value
efi-apple-payload2   <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>A497758D-DA7D-46D3-9A8D-64E4A55B3D3A</string></dict></dict><key>BLLastBSDName</key><string>disk0s1</string></dict><dict><key>IOEFIDevicePathType</key><string>MediaFilePath</string><key>Path</key><string>\EFI\APPLE\UPDATERS\MULTIUPDATER\flasher_update.smc</string></dict></array>%00
fakesmc-key-$Adr-ui32   %00%00%03%00
EFILoginHiDPI   %00%00%00%00
Clover.BackupDirOnDestVol   Yes
fakesmc-key-BNum-ui8   %01
fakesmc-key-BBIN-ui8   %01
Clover.LogEveryBoot   16
efi-apple-payload3   <array><dict><key>IOMatch</key><dict><key>IOProviderClass</key><string>IOMedia</string><key>IOPropertyMatch</key><dict><key>UUID</key><string>A497758D-DA7D-46D3-9A8D-64E4A55B3D3A</string></dict></dict><key>BLLastBSDName</key><string>disk0s1</string></dict><dict><key>IOEFIDevicePathType</key><string>MediaFilePath</string><key>Path</key><string>\EFI\APPLE\UPDATERS\MULTIUPDATER\Mac-9F18E312C5C2BF0B.epm</string></dict></array>%00
prev-lang:kbd   fr-FR:60
tests-Air:~ test$

_________________
mes configs:

si nous vous avons aidé faites des TUTOS de vos installations
merci d'avance
je ne réponds plus à ceux qui ne se sont pas présentés et mis matériel dans leurs profils
arcade33
arcade33
Souverain
Souverain

Date d'inscription : 27/10/2013
Age : 69
Localisation : LANGON 33 - FRANCE

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Lun 8 Jan - 20:32

Voir la page initial, mes vidéos sont maintenant en Format HTML Cool
Cliquer sur la video et vous verez la video en 1900x900 p tu lol!

Jai presque tout mis les videos des programme High Sierra de cette façon ha6

Si ont me dit que les videos sont difficile a voir  ha3  et bien je dit retourne sur ton Optometriste Clover Créateur-V10 - Page 3 1037447622 Clover Créateur-V10 - Page 3 3259054435 Clover Créateur-V10 - Page 3 1037447622
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par arcade33 Mar 9 Jan - 3:17

très bon les vidéos
bravo +1 +1 +1 +1

_________________
mes configs:

si nous vous avons aidé faites des TUTOS de vos installations
merci d'avance
je ne réponds plus à ceux qui ne se sont pas présentés et mis matériel dans leurs profils
arcade33
arcade33
Souverain
Souverain

Date d'inscription : 27/10/2013
Age : 69
Localisation : LANGON 33 - FRANCE

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Mar 9 Jan - 6:16

arcade33 a écrit:très bon les vidéos
bravo +1 +1 +1 +1
Merci @arcade33 Smile
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Sam 13 Jan - 8:44

4376 OK ha1

4376:
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par arcade33 Sam 13 Jan - 9:19

moi aussi Very Happy Very Happy
4376 OK
4376:

_________________
mes configs:

si nous vous avons aidé faites des TUTOS de vos installations
merci d'avance
je ne réponds plus à ceux qui ne se sont pas présentés et mis matériel dans leurs profils
arcade33
arcade33
Souverain
Souverain

Date d'inscription : 27/10/2013
Age : 69
Localisation : LANGON 33 - FRANCE

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Dim 14 Jan - 12:30

Je vient de compiler les deux nouveau Drivers efi  AptioMemoryFix.efi / AptioInputFix.efi
de ➤vit9696  Qui sont une tres grandes avancer, plus performant que AptioFi de Clover Cool  je les tester sur mon portable et les ajout dans Clover Special Edition +1
EDIT *****
Sur mon portable sa boot pas , Smile
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Dim 14 Jan - 14:32

chris1111 a écrit:Je vient de compiler les deux nouveau Drivers efi  AptioMemoryFix.efi / AptioInputFix.efi
de ➤vit9696  Qui sont une tres grandes avancer, plus performant que AptioFi de Clover Cool  je les tester sur mon portable et les ajout dans Clover Special Edition +1
EDIT *****
Sur mon portable sa boot pas , Smile
Dernière version Compiler RC5
 
marche parfaitement sur mon Portable. cheers  cheers
Fonctionne aussi comme un charme sur mon PC Dell Optiplex en UEFI ha1 +1 Fonctionne aussi dans les Drivers64 pour ESP
Si testeur veulent tester les Drivers, mettre les deux Drivers dans les DriversUEFI et virer AptioFix ou AptioFix2
Ou les Drivers x64 dans les Drivers64 pour ESP  cat+
Booter en verbose et poster votre Clover Boot Log avec vos impressions.
Merci
Ayer un volumes de recuperation au cas ou  clin d'oeil
J'ajoute aussi la version X64 +1

PS: Si tout est bien confirmer je pourrais dans Clover Special Edition virer les deux Drivers AptioFix et AptioFix2 et mettre Mandatoire cest deux Nouveau Drivers, ca éviterais a avoir a les choisir, ils sinstallerais par Default Laughing
Avec ce que je vois, je pense que cest ce qui vas arriver, vit9696 a fait un travail fantastique et son code est de loin supérieur a l'ancien oui
Fichiers joints
Clover Créateur-V10 - Page 3 Attachment
Archive.zip Vous n'avez pas la permission de télécharger les fichiers joints.(18 Ko) Téléchargé 4 fois
Clover Créateur-V10 - Page 3 Attachment
Archive-x64.zip Vous n'avez pas la permission de télécharger les fichiers joints.(18 Ko) Téléchargé 5 fois
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par arcade33 Lun 15 Jan - 5:22

j'ai viré AptioFix2  clover en UEFI  Very Happy
booter -V
resultat
c'est bon pour moi  Very Happy  +1
il me semble que le boot est plus rapide

Code:
0:100  0:100  MemLog inited, TSC freq: 3103054214
0:100  0:000  CPU was calibrated with ACPI PM Timer
0:100  0:000  
0:100  0:000  Now is 15.1.2018,  11:15:2 (GMT)
0:100  0:000  Starting Clover revision: 4376 on American Megatrends EFI
0:100  0:000  Build with: [Args: -mc -D NO_GRUB_DRIVERS | -D NO_GRUB_DRIVERS -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.13.3 | XCODE: 9.2]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,8C148DA9-EBA9-4D4F-997A-98310C314A61,0x28,0x64000) @DB3D9398
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = Kingston
0:100  0:000  SmbiosTable.Type17->SerialNumber = 71232F57
0:100  0:000  SmbiosTable.Type17->PartNumber = 9905403-181.A00LF
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Transcend
0:100  0:000  SmbiosTable.Type17->SerialNumber = 000944A8
0:100  0:000  SmbiosTable.Type17->PartNumber = JM1333KLN-4G      
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Transcend
0:100  0:000  SmbiosTable.Type17->SerialNumber = 000944A8
0:100  0:000  SmbiosTable.Type17->PartNumber = JM1333KLN-4G      
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'To be filled by O.E.M.' with board 'Z77X-UD3H'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=306A9
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  BrandString = Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz
0:100  0:000   The CPU supported turbo
0:100  0:000  MSR 0x35               40004
0:100  0:000  MSR 0xE2 before patch 1E000403
0:100  0:000  MSR 0xCE              00081010_F0011F00
0:100  0:000  corrected FLEX_RATIO = 80000
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency = 107 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100  0:000  MaxDiv/MinDiv: 31.0/16
0:100  0:000  Turbo: 33/34/35/35
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3300 MHz
0:100  0:000  TSC: 3300 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  ExternalClock: 25 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0150 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0151 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 11C6 class=030000
0:100  0:000   - GFX: Model=MSI GeForce GTX 650 Ti family E6 (Nvidia)
0:100  0:000  PCI (00|01:00.01) : 10DE 0E0B class=040300
0:100  0:000   - HDMI Audio:
0:100  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
0:100  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:100  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
0:100  0:000  PCI (00|00:1C.04) : 8086 1E18 class=060400
0:100  0:000  PCI (00|03:00.00) : 1106 3432 class=0C0330
0:100  0:000  PCI (00|00:1C.05) : 8086 244E class=060401
0:100  0:000  PCI (00|04:00.00) : 8086 244E class=060401
0:100  0:000  PCI (00|00:1C.06) : 8086 1E1C class=060400
0:100  0:000  PCI (00|06:00.00) : 1969 1091 class=020000
0:100  0:000   - LAN: 0 Vendor=Atheros
0:100  0:000  PCI (00|00:1C.07) : 8086 1E1E class=060400
0:100  0:000  PCI (00|07:00.00) : 1B4B 9172 class=010601
0:100  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
0:100  0:000  PCI (00|00:1F.00) : 8086 1E44 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 4 bytes
0:103  0:003  EFI\CLOVER\AMB.plist not loaded with name from LoadOptions: Not Found
0:105  0:001  EFI\CLOVER\config.plist loaded: Success
0:105  0:000  === [ GetListOfThemes ] ===================================
0:110  0:004  - [00]: applestyle
0:113  0:003  - [01]: BGM
0:119  0:006  - [02]: BLACK
0:121  0:002  - [03]: black_green
0:124  0:003  - [04]: BLUEMAC
0:127  0:003  - [05]: BOOTCAMP
0:130  0:002  - [06]: christmas
0:132  0:002  - [07]: CHROME
0:135  0:002  - [08]: Clover-X
0:137  0:002  - [09]: EMBEDDED
0:139  0:001  - [09]: gold_clover
0:142  0:003  - [10]: Hackintosh-MF
0:144  0:002  - [11]: Harley
0:147  0:003  - [12]: HMF
0:150  0:002  - [13]: ICLOVER
0:152  0:002  - [14]: IN_BOX
0:154  0:002  - [15]: MACOSX
0:157  0:002  - [16]: magnifico
0:159  0:002  - [17]: METAL
0:164  0:004  - [18]: Movies
0:166  0:002  - [19]: NEWYEAR
0:168  0:002  - [20]: ORANGE
0:170  0:002  - [21]: OS_BOX
0:172  0:002  - [22]: OS_ONE
0:174  0:001  - [23]: RANDOM
0:175  0:001  - [23]: RED
0:177  0:002  - [24]: Shield
0:183  0:006  - [25]: Space
0:186  0:002  - [26]: steampunkblack
0:189  0:002  - [27]: THINKPAD
0:192  0:003  - [28]: Tribute
0:195  0:002  === [ Found config plists ] ===============================
0:197  0:002  - config.plist
0:197  0:000  === [ GetEarlyUserSettings ] ==============================
0:197  0:000  timeout set to 4
0:197  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:197  0:000  KextsToPatch: 1 requested
0:197  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
0:197  0:000  Default theme: macosx
0:197  0:000  Hiding entries with string Windows
0:197  0:000  Hiding entries with string BOOTX64.EFI
0:197  0:000  === [ LoadDrivers ] =======================================
0:200  0:003  Loading AppleImageCodec-64.efi  status=Success
0:201  0:000  Loading AppleKeyAggregator-64.efi  status=Success
0:202  0:000  Loading AppleUITheme-64.efi  status=Success
0:203  0:000  Loading DataHubDxe-64.efi  status=Success
0:219  0:016  Loading Fat-64.efi  status=Success
0:220  0:000   - driver needs connecting
0:220  0:000  Loading FirmwareVolume-64.efi  status=Success
0:221  0:000  Loading FSInject-64.efi  status=Success
0:222  0:001  Loading AptioInputFix-64.efi  status=Success
0:224  0:001  Loading PartitionDxe-64.efi  status=Success
0:225  0:000   - driver needs connecting
0:225  0:000  Loading SMCHelper-64.efi  status=Success
0:226  0:000  Loading VBoxHfs-64.efi  status=Success
0:227  0:000   - driver needs connecting
0:227  0:000  Loading APFS.EFI  status=Success
0:233  0:006   - driver needs connecting
0:233  0:000  Loading HFSPlus.efi  status=Success
0:235  0:001   - driver needs connecting
0:235  0:000  Loading AptioMemoryFix-64.efi  status=Success
0:236  0:000  5 drivers needs connecting ...
0:236  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:236  0:000  Partition driver loaded:
0:236  0:000  HFS+ driver loaded
0:236  0:000  APFS driver loaded
0:236  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:324  0:088  === [ InitScreen ] ========================================
0:324  0:000  SetMaxResolution: found best mode 2: 1024x768
0:501  0:176  Video mode change to mode #2: Success
0:501  0:000   - set
0:501  0:000  Console modes reported: 4, available modes:
0:501  0:000   - [01]: 80x25 (current mode)
0:501  0:000   - [03]: 100x31
0:501  0:000   - [04]: 128x30
0:501  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,8C148DA9-EBA9-4D4F-997A-98310C314A61,0x28,0x64000)
0:501  0:000  Using embedded font: Success
0:998  0:496  === [ GetMacAddress ] =====================================
0:998  0:000  MAC address of LAN #0= 94:DE:80:AA:1E:7B:
0:998  0:000  === [ ScanSPD ] ===========================================
0:998  0:000  SMBus device : 8086 1E22 class=0C0500 status=Success
0:998  0:000  SMBus CmdReg: 0x1
0:998  0:000  Scanning SMBus [8086:1E22], mmio: 0xF7415004, ioport: 0xF000, hostc: 0x1
0:998  0:000  Slots to scan [8]...
0:998  0:000  SPD[0]: Type 11 @0x50
1:017  0:018  DDR speed 1333MHz
1:017  0:000  Slot: 0 Type 24 4096MB 1333MHz Vendor=Transcend Information PartNo=JM1333KLN-4G SerialNo=0000000904040A08
1:017  0:000  SPD[1]: Type 11 @0x51
1:036  0:018  DDR speed 1333MHz
1:036  0:000  Slot: 1 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-181.A00LF SerialNo=07010203020F0507
1:036  0:000  SPD[2]: Type 11 @0x52
1:055  0:018  DDR speed 1333MHz
1:055  0:000  Slot: 2 Type 24 4096MB 1333MHz Vendor=Transcend Information PartNo=JM1333KLN-4G SerialNo=0000000904040A08
1:056  0:000  === [ GetAcpiTablesList ] =================================
1:056  0:000  Get Acpi Tables List from RSDT:
1:056  0:000   - [00]: FACP  A M I len=132
1:056  0:000   - [01]: APIC  A M I len=114
1:056  0:000   - [02]: MCFG   len=60
1:056  0:000   - [03]: HPET  A M I len=56
1:056  0:000   - [04]: SSDT  SataTabl len=877
1:056  0:000   - [05]: SSDT  Cpu0Ist len=2474
1:056  0:000   - [06]: SSDT  CpuPm len=2706
1:056  0:000  Calibrated TSC Frequency = 3103054214 = 3103MHz
1:056  0:000  === [ GetUserSettings ] ===================================
1:056  0:000  USB FixOwnership: yes
1:056  0:000  Dropping 3 tables:
1:056  0:000   - [00]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
1:056  0:000           - set table: 54445353,       6D50757043 to drop: yes
1:056  0:000   - [01]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
1:056  0:000           - set table: 54445353,   74734930757043 to drop: yes
1:056  0:000   - [02]: Drop table  signature="DMAR" (52414D44)
1:056  0:000           - set table: 52414D44,                0 to drop: no
1:056  0:000   - final DSDT Fix mask=1FCAE955
1:056  0:000  EnableC6: yes
1:056  0:000  Using ProductName from config
1:056  0:000  ProductName: iMac14,1
1:056  0:000  Using latest BiosVersion from clover
1:056  0:000  BiosVersion: IM141.88Z.0123.B00.1708211404
1:056  0:000  BiosReleaseDate: 08/21/2017
1:056  0:000  Using FirmwareFeatures from clover
1:056  0:000  FirmwareFeatures: 0xE00FE137
1:056  0:000  Using FirmwareFeaturesMask from clover
1:056  0:000  FirmwareFeaturesMask: 0xFF1FFF3F
1:056  0:000  Using PlatformFeature from clover
1:056  0:000  PlatformFeature: 0x1
1:056  0:000  Board-ID set from config as Mac-031B6874CF7F642A
1:056  0:000  BoardType: 0xA
1:056  0:000  ChassisType: 0xD
1:203  0:146  === [ ScanVolumes ] =======================================
1:203  0:000  Found 4 volumes with blockIO
1:203  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
1:204  0:000          Result of bootcode detection: bootable unknown (legacy)
1:204  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,8C148DA9-EBA9-4D4F-997A-98310C314A61,0x28,0x64000)
1:204  0:000          Result of bootcode detection: bootable unknown (legacy)
1:211  0:007          This is SelfVolume !!
1:211  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,79938A92-4B0F-488B-B897-024C40F7D19D,0x64028,0x33301D30)
1:212  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,B7F789E7-D10B-42D3-B786-D5BED943AA2F,0x33365D58,0x70202B0)
1:212  0:000  === [ InitTheme ] =========================================
1:217  0:004  Using theme 'macosx' (EFI\CLOVER\themes\macosx)
1:217  0:000  OS main and drive as badge
1:217  0:000  Warning! Character width 9 should be even!
1:219  0:002  Loading font from ThemeDir: Success
1:220  0:000  Choosing theme macosx
1:220  0:000  after NVRAM boot-args=kext-dev-mode=1 rootless=0
1:220  0:000  === [ Dump SMC keys from NVRAM ] ==========================
1:220  0:000  found AppleSMC protocol
1:231  0:011  Registered 17 SMC keys
1:231  0:000  === [ ScanLoader ] ========================================
1:231  0:000  - [01]: 'EFI'
1:247  0:015  - [02]: 'MacHDD'
1:258  0:010          AddLoaderEntry for Volume Name=MacHDD
1:267  0:009      Check if volume Is Hibernated:
1:267  0:000      Check sleep image 'by signature':
1:283  0:015      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
1:283  0:000      using default sleep image name = \private\var\vm\sleepimage
1:289  0:006      no valid sleep image offset was found
1:289  0:000       sleepimage offset could not be acquired
1:289  0:000      hibernated: no - sign
1:302  0:012  - [03]: 'Recovery HD'
1:303  0:001          AddLoaderEntry for Volume Name=Recovery HD
1:316  0:013  Scanning legacy ...
1:316  0:000  === [ AddCustomTool ] =====================================
1:319  0:002  found tool \EFI\CLOVER\tools\Shell64U.efi
1:319  0:000  Checking EFI partition Volume 1 for Clover
1:320  0:000   Found Clover
1:324  0:004  === [ GetEfiBootDeviceFromNvram ] =========================
1:325  0:000   - found entry 0. 'Boot macOS from MacHDD', Volume 'MacHDD', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,79938A92-4B0F-488B-B897-024C40F7D19D,0x64028,0x33301D30)\System\Library\CoreServices\boot.efii'
1:325  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
1:429  0:103  GUI ready
23:475  22:046  Boot option Boot0000 not found
23:475  0:000  === [ StartLoader ] =======================================
23:475  0:000  Finally: ExternalClock=25MHz BusSpeed=100098kHz CPUFreq=3103MHz PIS: hw.busfrequency=100000000Hz
23:475  0:000  Loading boot.efi  status=Success
23:571  0:095  GetOSVersion: 10.13.3 (17D34a)
23:571  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_OS | CSR_ALLOW_UNAPPROVED_KEXTS
23:571  0:000  Filtering KextPatches:
23:571  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.13.3 | MatchOS: All | MatchBuild: All] ==> allowed
23:571  0:000  Will not patch boot.efi
23:571  0:000  === [ PatchSmbios ] =======================================
23:571  0:000  insert table 9 for dev 0:0
23:571  0:000  insert table 9 for dev 0:1
23:571  0:000  insert table 9 for dev 0:0
23:572  0:000  Channels: 2
23:572  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
23:572  0:000  SMBIOS Type 17 Index = 0 => 0 0:
23:572  0:000  BANK 0 DIMM0 1333MHz 4096MB
23:572  0:000  SMBIOS Type 17 Index = 1 => 2 2:
23:572  0:000  BANK 1 DIMM0 1333MHz 4096MB
23:572  0:000  SMBIOS Type 17 Index = 2 => 1 1:
23:572  0:000  BANK 0 DIMM1 1333MHz 4096MB
23:572  0:000  SMBIOS Type 17 Index = 3 => 3 3:
23:572  0:000  BANK 1 DIMM1 EMPTY
23:572  0:000  mTotalSystemMemory = 12288
23:572  0:000  NumberOfMemoryDevices = 4
23:572  0:000  Type20[0]->End = 0xBFFFFF, Type17[2] = 0x3000
23:572  0:000  Type20[1]->End = 0x7FFFFF, Type17[1] = 0x5000
23:572  0:000  Type20[2]->End = 0x3FFFFF, Type17[0] = 0x6000
23:572  0:000  Table 131 is present, CPUType=10
23:572  0:000  Change to: 604
23:572  0:000  === [ PatchACPI ] =========================================
23:572  0:000  Xsdt reallocation done
23:572  0:000  old FADT length=F4
23:572  0:000   SignatureFixup: 0x0 -> 0
23:572  0:000  Found OperationRegion(GNVS, SystemMemory, DE09CE18, ...)
23:572  0:000  Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
23:572  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
23:572  0:000  Found OperationRegion(CPSB, SystemMemory, DDF75F98, ...)
23:572  0:000  Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
23:572  0:000  Found OperationRegion(TVID, SystemMemory, FED40F00, ...)
23:572  0:000  Found OperationRegion(TPMR, SystemMemory, FED40000, ...)
23:573  0:001  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
23:574  0:001  Apply DsdtFixMask=0x1FCAE955
23:574  0:000     drop _DSM mask=0x0000
23:574  0:000  === [ FixBiosDsdt ] =======================================
23:574  0:000  VideoCard devID=0x11C610DE
23:574  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
23:575  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
23:575  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
23:877  0:302  USBADR[2] = 0x1C0004 and PCIe = 0x0
23:877  0:000  USBADR[3] = 0x1D0000 and PCIe = 0xFFFE
23:877  0:000  first CPU found at 82A2 offset 82A5
23:877  0:000  score candidate at 829E
23:877  0:000  score inserted in acpi_cpu_score _PR_
23:877  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
23:877  0:000  Found PCIROOTUID = 0
23:877  0:000  Start RTC Fix
23:877  0:000  found RTC Length not match, Maybe will cause CMOS reset will patch it.
23:877  0:000  found RTC had IRQNoFlag will move -3 bytes
23:877  0:000  ...len=AD74
23:877  0:000  new size written to 235D shift=0 len=AD74
23:877  0:000  len after correct outers AD74
23:877  0:000  Start PIC Fix
23:877  0:000  PIC size=A5 at 2209
23:877  0:000  found CRS at 221D size 8D
23:877  0:000  found PIC had IRQNoFlag will move -3 bytes
23:877  0:000  Fix Device PIC size -3
23:877  0:000  Start HPET Fix
23:878  0:000  Start Display0 Fix
23:878  0:000  Found internal video device FFFF@478D, unusable
23:878  0:000  Creating Method(_DSM) for 10DE card
23:878  0:000  patch Display #0 of Vendor=0x10DE
23:878  0:000  Start NetWork Fix
23:878  0:000  found NetWork device [0x001C0006:0] at 4608 and Name is PXSX
23:878  0:000  NetworkADR1=1C0006 NetworkADR2=0
23:878  0:000  network DSM created, size=4D
23:878  0:000  patch HDEF in DSDT
23:878  0:000  Start HDA Fix
23:879  0:000  found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
23:879  0:000  NewName HDEF already present, renaming impossible
23:879  0:000  _DSM already exists, patch HDA will not be applied
23:879  0:000  Start Add IMEI
23:879  0:000  Start HDMI13 Fix
23:879  0:000  have no HDMI device while HDMIADR2=1
23:879  0:000  HDMIADR1=10000 HDMIADR2=1
23:879  0:000    with default properties
23:879  0:000   deleting device CRT_
23:880  0:000   deleting device DVI_
23:880  0:000   deleting device SPKR
23:880  0:000   deleting device ECP_
23:880  0:000   deleting device LPT_
23:880  0:000   deleting device FDC0
23:880  0:000   deleting device ECP1
23:881  0:000   deleting device LPT1
23:881  0:000  Start PNLF Fix
23:881  0:000  found PWRB at 4B36
23:881  0:000  Start _S3D Fix
23:881  0:000    indirect name=SRCB
23:881  0:000  Start ADP1 fix
23:882  0:000  no device(AC) exists
23:882  0:000  Start SHUTDOWN Fix len=ADFB
23:882  0:000  PreCleanup XSDT: count=7, length=92
23:882  0:000  PreCleanup XSDT, corrected XSDT: count=7, length=92
23:882  0:000  === [ ACPIDropTables ] ====================================
23:882  0:000  Drop tables from XSDT, SIGN=SSDT TableID=CpuPm Length=2706
23:882  0:000   Table[6]: SSDT  CpuPm  2706 dropped
23:882  0:000  Drop tables from XSDT, SIGN=SSDT TableID=Cpu0Ist Length=2474
23:882  0:000   Table[5]: SSDT  Cpu0Ist  2474 dropped
23:882  0:000  === [ DropSSDT ] ==========================================
23:882  0:000  Drop tables from XSDT, SIGN=SSDT TableID= Length=0
23:882  0:000   Table[4]: SSDT  SataTabl  877 dropped
23:882  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
23:882  0:000  Maximum control=0x1F
23:882  0:000  Turbo control=0x23
23:882  0:000  P-States: min 0x7, max 0x23
23:882  0:000  SSDT with CPU P-States and plugin-type generated successfully
23:882  0:000  SSDT with CPU C-States generated successfully
23:882  0:000  Cleanup XSDT: count=9, length=108
23:882  0:000  corrected XSDT count=6, length=84
23:882  0:000  === [ RestSetup macOS ] ===================================
23:882  0:000  EdidDiscovered size=128
23:882  0:000  ---Discovered EDID Table size:128
23:882  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  04  69
23:882  0:000  010  |  A2  24  55  2C  00  00  12  14  01  03
23:882  0:000  020  |  80  34  1D  78  2A  C7  20  A4  55  49
23:882  0:000  030  |  99  27  13  50  54  BF  EF  00  71  4F
23:882  0:000  040  |  81  40  81  80  95  00  B3  00  D1  C0
23:882  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
23:882  0:000  060  |  2D  40  58  2C  45  00  09  25  21  00
23:882  0:000  070  |  00  1E  00  00  00  FF  00  41  35  4C
23:882  0:000  080  |  4D  54  46  30  31  31  33  34  39  0A
23:882  0:000  090  |  00  00  00  FD  00  37  4B  1E  55  10
23:882  0:000  100  |  00  0A  20  20  20  20  20  20  00  00
23:882  0:000  110  |  00  FC  00  41  53  55  53  20  56  48
23:882  0:000  120  |  32  34  32  0A  20  20  00  60
23:882  0:000  --- Patched EDID size:128
23:882  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  04  69
23:882  0:000  010  |  A2  24  55  2C  00  00  12  14  01  03
23:882  0:000  020  |  80  34  1D  78  2A  C7  20  A4  55  49
23:882  0:000  030  |  99  27  13  50  54  BF  EF  00  71  4F
23:882  0:000  040  |  81  40  81  80  95  00  B3  00  D1  C0
23:882  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
23:882  0:000  060  |  2D  40  58  2C  45  00  09  25  21  00
23:882  0:000  070  |  00  1E  00  00  00  FF  00  41  35  4C
23:882  0:000  080  |  4D  54  46  30  31  31  33  34  39  0A
23:882  0:000  090  |  00  00  00  FD  00  37  4B  1E  55  10
23:882  0:000  100  |  00  0A  20  20  20  20  20  20  00  00
23:882  0:000  110  |  00  FC  00  41  53  55  53  20  56  48
23:882  0:000  120  |  32  34  32  0A  20  20  00  60
23:882  0:000  mem_detected 2048Mb
23:882  0:000  read_nVidia_ROM
23:882  0:000  Using PRAMIN fixups
24:023  0:140  PROM
24:230  0:207  version 80.06.3C.00.11
24:230  0:000  nVidia MSI GeForce GTX 650 Ti  2048MB NVE6 [10DE:11C6] :: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0) => device #1
24:230  0:000  Nvidia: VideoPorts: undefined, default to: 2
24:230  0:000  set NVCAP: 04000000-00000300-0C000000-00000007-00000000
24:230  0:000  stringlength = 3898
24:230  0:000  CurrentMode: Width=1024 Height=768
24:230  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DB3D9098
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DB3D9098
24:232  0:001  Use origin smbios table type 1 guid.
24:235  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
24:235  0:000  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1765)
24:242  0:006  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.13
24:242  0:000  Extra kext: EFI\CLOVER\kexts\10.13\VoodooHDA.kext (v.2.8.9)
24:253  0:010  Extra kext: EFI\CLOVER\kexts\10.13\USBInjectAll.kext (v.0.6.3)
24:487  0:233  Extra kext: EFI\CLOVER\kexts\10.13\GenericBrightness.kext (v.1)
24:492  0:005  Extra kext: EFI\CLOVER\kexts\10.13\FakePCIID_XHCIMux.kext (v.1.3.9)
24:499  0:007  Extra kext: EFI\CLOVER\kexts\10.13\FakePCIID.kext (v.1.3.9)
24:505  0:005  Extra kext: EFI\CLOVER\kexts\10.13\AtherosE2200Ethernet.kext (v.2.2.2)
24:512  0:007  Custom boot screen not used because entry has unset use graphics

_________________
mes configs:

si nous vous avons aidé faites des TUTOS de vos installations
merci d'avance
je ne réponds plus à ceux qui ne se sont pas présentés et mis matériel dans leurs profils
arcade33
arcade33
Souverain
Souverain

Date d'inscription : 27/10/2013
Age : 69
Localisation : LANGON 33 - FRANCE

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Lun 15 Jan - 5:45

arcade33 a écrit:j'ai viré AptioFix2  clover en UEFI  Very Happy
booter -V
resultat
c'est bon pour moi  Very Happy  +1
il me semble que le boot est plus rapide  

Code:
0:100  0:100  MemLog inited, TSC freq: 3103054214
0:100  0:000  CPU was calibrated with ACPI PM Timer
0:100  0:000  
0:100  0:000  Now is 15.1.2018,  11:15:2 (GMT)
0:100  0:000  Starting Clover revision: 4376 on American Megatrends EFI
0:100  0:000  Build with: [Args: -mc -D NO_GRUB_DRIVERS | -D NO_GRUB_DRIVERS -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.13.3 | XCODE: 9.2]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,8C148DA9-EBA9-4D4F-997A-98310C314A61,0x28,0x64000) @DB3D9398
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = Kingston
0:100  0:000  SmbiosTable.Type17->SerialNumber = 71232F57
0:100  0:000  SmbiosTable.Type17->PartNumber = 9905403-181.A00LF
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Transcend
0:100  0:000  SmbiosTable.Type17->SerialNumber = 000944A8
0:100  0:000  SmbiosTable.Type17->PartNumber = JM1333KLN-4G      
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = Transcend
0:100  0:000  SmbiosTable.Type17->SerialNumber = 000944A8
0:100  0:000  SmbiosTable.Type17->PartNumber = JM1333KLN-4G      
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'To be filled by O.E.M.' with board 'Z77X-UD3H'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=306A9
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  BrandString = Intel(R) Core(TM) i5-3450 CPU @ 3.10GHz
0:100  0:000   The CPU supported turbo
0:100  0:000  MSR 0x35               40004
0:100  0:000  MSR 0xE2 before patch 1E000403
0:100  0:000  MSR 0xCE              00081010_F0011F00
0:100  0:000  corrected FLEX_RATIO = 80000
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency = 107 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100  0:000  MaxDiv/MinDiv: 31.0/16
0:100  0:000  Turbo: 33/34/35/35
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3300 MHz
0:100  0:000  TSC: 3300 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  ExternalClock: 25 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 0150 class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 0151 class=060400
0:100  0:000  PCI (00|01:00.00) : 10DE 11C6 class=030000
0:100  0:000   - GFX: Model=MSI GeForce GTX 650 Ti family E6 (Nvidia)
0:100  0:000  PCI (00|01:00.01) : 10DE 0E0B class=040300
0:100  0:000   - HDMI Audio:
0:100  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
0:100  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:100  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
0:100  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
0:100  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
0:100  0:000  PCI (00|00:1C.04) : 8086 1E18 class=060400
0:100  0:000  PCI (00|03:00.00) : 1106 3432 class=0C0330
0:100  0:000  PCI (00|00:1C.05) : 8086 244E class=060401
0:100  0:000  PCI (00|04:00.00) : 8086 244E class=060401
0:100  0:000  PCI (00|00:1C.06) : 8086 1E1C class=060400
0:100  0:000  PCI (00|06:00.00) : 1969 1091 class=020000
0:100  0:000   - LAN: 0 Vendor=Atheros
0:100  0:000  PCI (00|00:1C.07) : 8086 1E1E class=060400
0:100  0:000  PCI (00|07:00.00) : 1B4B 9172 class=010601
0:100  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
0:100  0:000  PCI (00|00:1F.00) : 8086 1E44 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 4 bytes
0:103  0:003  EFI\CLOVER\AMB.plist not loaded with name from LoadOptions: Not Found
0:105  0:001  EFI\CLOVER\config.plist loaded: Success
0:105  0:000  === [ GetListOfThemes ] ===================================
0:110  0:004  - [00]: applestyle
0:113  0:003  - [01]: BGM
0:119  0:006  - [02]: BLACK
0:121  0:002  - [03]: black_green
0:124  0:003  - [04]: BLUEMAC
0:127  0:003  - [05]: BOOTCAMP
0:130  0:002  - [06]: christmas
0:132  0:002  - [07]: CHROME
0:135  0:002  - [08]: Clover-X
0:137  0:002  - [09]: EMBEDDED
0:139  0:001  - [09]: gold_clover
0:142  0:003  - [10]: Hackintosh-MF
0:144  0:002  - [11]: Harley
0:147  0:003  - [12]: HMF
0:150  0:002  - [13]: ICLOVER
0:152  0:002  - [14]: IN_BOX
0:154  0:002  - [15]: MACOSX
0:157  0:002  - [16]: magnifico
0:159  0:002  - [17]: METAL
0:164  0:004  - [18]: Movies
0:166  0:002  - [19]: NEWYEAR
0:168  0:002  - [20]: ORANGE
0:170  0:002  - [21]: OS_BOX
0:172  0:002  - [22]: OS_ONE
0:174  0:001  - [23]: RANDOM
0:175  0:001  - [23]: RED
0:177  0:002  - [24]: Shield
0:183  0:006  - [25]: Space
0:186  0:002  - [26]: steampunkblack
0:189  0:002  - [27]: THINKPAD
0:192  0:003  - [28]: Tribute
0:195  0:002  === [ Found config plists ] ===============================
0:197  0:002  - config.plist
0:197  0:000  === [ GetEarlyUserSettings ] ==============================
0:197  0:000  timeout set to 4
0:197  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:197  0:000  KextsToPatch: 1 requested
0:197  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
0:197  0:000  Default theme: macosx
0:197  0:000  Hiding entries with string Windows
0:197  0:000  Hiding entries with string BOOTX64.EFI
0:197  0:000  === [ LoadDrivers ] =======================================
0:200  0:003  Loading AppleImageCodec-64.efi  status=Success
0:201  0:000  Loading AppleKeyAggregator-64.efi  status=Success
0:202  0:000  Loading AppleUITheme-64.efi  status=Success
0:203  0:000  Loading DataHubDxe-64.efi  status=Success
0:219  0:016  Loading Fat-64.efi  status=Success
0:220  0:000   - driver needs connecting
0:220  0:000  Loading FirmwareVolume-64.efi  status=Success
0:221  0:000  Loading FSInject-64.efi  status=Success
0:222  0:001  Loading AptioInputFix-64.efi  status=Success
0:224  0:001  Loading PartitionDxe-64.efi  status=Success
0:225  0:000   - driver needs connecting
0:225  0:000  Loading SMCHelper-64.efi  status=Success
0:226  0:000  Loading VBoxHfs-64.efi  status=Success
0:227  0:000   - driver needs connecting
0:227  0:000  Loading APFS.EFI  status=Success
0:233  0:006   - driver needs connecting
0:233  0:000  Loading HFSPlus.efi  status=Success
0:235  0:001   - driver needs connecting
0:235  0:000  Loading AptioMemoryFix-64.efi  status=Success
0:236  0:000  5 drivers needs connecting ...
0:236  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:236  0:000  Partition driver loaded:
0:236  0:000  HFS+ driver loaded
0:236  0:000  APFS driver loaded
0:236  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:324  0:088  === [ InitScreen ] ========================================
0:324  0:000  SetMaxResolution: found best mode 2: 1024x768
0:501  0:176  Video mode change to mode #2: Success
0:501  0:000   - set
0:501  0:000  Console modes reported: 4, available modes:
0:501  0:000   - [01]: 80x25 (current mode)
0:501  0:000   - [03]: 100x31
0:501  0:000   - [04]: 128x30
0:501  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,8C148DA9-EBA9-4D4F-997A-98310C314A61,0x28,0x64000)
0:501  0:000  Using embedded font: Success
0:998  0:496  === [ GetMacAddress ] =====================================
0:998  0:000  MAC address of LAN #0= 94:DE:80:AA:1E:7B:
0:998  0:000  === [ ScanSPD ] ===========================================
0:998  0:000  SMBus device : 8086 1E22 class=0C0500 status=Success
0:998  0:000  SMBus CmdReg: 0x1
0:998  0:000  Scanning SMBus [8086:1E22], mmio: 0xF7415004, ioport: 0xF000, hostc: 0x1
0:998  0:000  Slots to scan [8]...
0:998  0:000  SPD[0]: Type 11 @0x50
1:017  0:018  DDR speed 1333MHz
1:017  0:000  Slot: 0 Type 24 4096MB 1333MHz Vendor=Transcend Information PartNo=JM1333KLN-4G SerialNo=0000000904040A08
1:017  0:000  SPD[1]: Type 11 @0x51
1:036  0:018  DDR speed 1333MHz
1:036  0:000  Slot: 1 Type 24 4096MB 1333MHz Vendor=Kingston PartNo=9905403-181.A00LF SerialNo=07010203020F0507
1:036  0:000  SPD[2]: Type 11 @0x52
1:055  0:018  DDR speed 1333MHz
1:055  0:000  Slot: 2 Type 24 4096MB 1333MHz Vendor=Transcend Information PartNo=JM1333KLN-4G SerialNo=0000000904040A08
1:056  0:000  === [ GetAcpiTablesList ] =================================
1:056  0:000  Get Acpi Tables List from RSDT:
1:056  0:000   - [00]: FACP  A M I len=132
1:056  0:000   - [01]: APIC  A M I len=114
1:056  0:000   - [02]: MCFG   len=60
1:056  0:000   - [03]: HPET  A M I len=56
1:056  0:000   - [04]: SSDT  SataTabl len=877
1:056  0:000   - [05]: SSDT  Cpu0Ist len=2474
1:056  0:000   - [06]: SSDT  CpuPm len=2706
1:056  0:000  Calibrated TSC Frequency = 3103054214 = 3103MHz
1:056  0:000  === [ GetUserSettings ] ===================================
1:056  0:000  USB FixOwnership: yes
1:056  0:000  Dropping 3 tables:
1:056  0:000   - [00]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
1:056  0:000           - set table: 54445353,       6D50757043 to drop: yes
1:056  0:000   - [01]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
1:056  0:000           - set table: 54445353,   74734930757043 to drop: yes
1:056  0:000   - [02]: Drop table  signature="DMAR" (52414D44)
1:056  0:000           - set table: 52414D44,                0 to drop: no
1:056  0:000   - final DSDT Fix mask=1FCAE955
1:056  0:000  EnableC6: yes
1:056  0:000  Using ProductName from config
1:056  0:000  ProductName: iMac14,1
1:056  0:000  Using latest BiosVersion from clover
1:056  0:000  BiosVersion: IM141.88Z.0123.B00.1708211404
1:056  0:000  BiosReleaseDate: 08/21/2017
1:056  0:000  Using FirmwareFeatures from clover
1:056  0:000  FirmwareFeatures: 0xE00FE137
1:056  0:000  Using FirmwareFeaturesMask from clover
1:056  0:000  FirmwareFeaturesMask: 0xFF1FFF3F
1:056  0:000  Using PlatformFeature from clover
1:056  0:000  PlatformFeature: 0x1
1:056  0:000  Board-ID set from config as Mac-031B6874CF7F642A
1:056  0:000  BoardType: 0xA
1:056  0:000  ChassisType: 0xD
1:203  0:146  === [ ScanVolumes ] =======================================
1:203  0:000  Found 4 volumes with blockIO
1:203  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)
1:204  0:000          Result of bootcode detection: bootable unknown (legacy)
1:204  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(1,GPT,8C148DA9-EBA9-4D4F-997A-98310C314A61,0x28,0x64000)
1:204  0:000          Result of bootcode detection: bootable unknown (legacy)
1:211  0:007          This is SelfVolume !!
1:211  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,79938A92-4B0F-488B-B897-024C40F7D19D,0x64028,0x33301D30)
1:212  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(3,GPT,B7F789E7-D10B-42D3-B786-D5BED943AA2F,0x33365D58,0x70202B0)
1:212  0:000  === [ InitTheme ] =========================================
1:217  0:004  Using theme 'macosx' (EFI\CLOVER\themes\macosx)
1:217  0:000  OS main and drive as badge
1:217  0:000  Warning! Character width 9 should be even!
1:219  0:002  Loading font from ThemeDir: Success
1:220  0:000  Choosing theme macosx
1:220  0:000  after NVRAM boot-args=kext-dev-mode=1 rootless=0
1:220  0:000  === [ Dump SMC keys from NVRAM ] ==========================
1:220  0:000  found AppleSMC protocol
1:231  0:011  Registered 17 SMC keys
1:231  0:000  === [ ScanLoader ] ========================================
1:231  0:000  - [01]: 'EFI'
1:247  0:015  - [02]: 'MacHDD'
1:258  0:010          AddLoaderEntry for Volume Name=MacHDD
1:267  0:009      Check if volume Is Hibernated:
1:267  0:000      Check sleep image 'by signature':
1:283  0:015      read prefs \Library\Preferences\com.apple.PowerManagement.plist status=Success
1:283  0:000      using default sleep image name = \private\var\vm\sleepimage
1:289  0:006      no valid sleep image offset was found
1:289  0:000       sleepimage offset could not be acquired
1:289  0:000      hibernated: no - sign
1:302  0:012  - [03]: 'Recovery HD'
1:303  0:001          AddLoaderEntry for Volume Name=Recovery HD
1:316  0:013  Scanning legacy ...
1:316  0:000  === [ AddCustomTool ] =====================================
1:319  0:002  found tool \EFI\CLOVER\tools\Shell64U.efi
1:319  0:000  Checking EFI partition Volume 1 for Clover
1:320  0:000   Found Clover
1:324  0:004  === [ GetEfiBootDeviceFromNvram ] =========================
1:325  0:000   - found entry 0. 'Boot macOS from MacHDD', Volume 'MacHDD', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0xFFFF,0x0)\HD(2,GPT,79938A92-4B0F-488B-B897-024C40F7D19D,0x64028,0x33301D30)\System\Library\CoreServices\boot.efii'
1:325  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
1:429  0:103  GUI ready
23:475  22:046  Boot option Boot0000 not found
23:475  0:000  === [ StartLoader ] =======================================
23:475  0:000  Finally: ExternalClock=25MHz BusSpeed=100098kHz CPUFreq=3103MHz PIS: hw.busfrequency=100000000Hz
23:475  0:000  Loading boot.efi  status=Success
23:571  0:095  GetOSVersion: 10.13.3 (17D34a)
23:571  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_OS | CSR_ALLOW_UNAPPROVED_KEXTS
23:571  0:000  Filtering KextPatches:
23:571  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.13.3 | MatchOS: All | MatchBuild: All] ==> allowed
23:571  0:000  Will not patch boot.efi
23:571  0:000  === [ PatchSmbios ] =======================================
23:571  0:000  insert table 9 for dev 0:0
23:571  0:000  insert table 9 for dev 0:1
23:571  0:000  insert table 9 for dev 0:0
23:572  0:000  Channels: 2
23:572  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
23:572  0:000  SMBIOS Type 17 Index = 0 => 0 0:
23:572  0:000  BANK 0 DIMM0 1333MHz 4096MB
23:572  0:000  SMBIOS Type 17 Index = 1 => 2 2:
23:572  0:000  BANK 1 DIMM0 1333MHz 4096MB
23:572  0:000  SMBIOS Type 17 Index = 2 => 1 1:
23:572  0:000  BANK 0 DIMM1 1333MHz 4096MB
23:572  0:000  SMBIOS Type 17 Index = 3 => 3 3:
23:572  0:000  BANK 1 DIMM1 EMPTY
23:572  0:000  mTotalSystemMemory = 12288
23:572  0:000  NumberOfMemoryDevices = 4
23:572  0:000  Type20[0]->End = 0xBFFFFF, Type17[2] = 0x3000
23:572  0:000  Type20[1]->End = 0x7FFFFF, Type17[1] = 0x5000
23:572  0:000  Type20[2]->End = 0x3FFFFF, Type17[0] = 0x6000
23:572  0:000  Table 131 is present, CPUType=10
23:572  0:000  Change to: 604
23:572  0:000  === [ PatchACPI ] =========================================
23:572  0:000  Xsdt reallocation done
23:572  0:000  old FADT length=F4
23:572  0:000   SignatureFixup: 0x0 -> 0
23:572  0:000  Found OperationRegion(GNVS, SystemMemory, DE09CE18, ...)
23:572  0:000  Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
23:572  0:000  Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
23:572  0:000  Found OperationRegion(CPSB, SystemMemory, DDF75F98, ...)
23:572  0:000  Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
23:572  0:000  Found OperationRegion(TVID, SystemMemory, FED40F00, ...)
23:572  0:000  Found OperationRegion(TPMR, SystemMemory, FED40000, ...)
23:573  0:001  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
23:574  0:001  Apply DsdtFixMask=0x1FCAE955
23:574  0:000     drop _DSM mask=0x0000
23:574  0:000  === [ FixBiosDsdt ] =======================================
23:574  0:000  VideoCard devID=0x11C610DE
23:574  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
23:575  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
23:575  0:000  USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
23:877  0:302  USBADR[2] = 0x1C0004 and PCIe = 0x0
23:877  0:000  USBADR[3] = 0x1D0000 and PCIe = 0xFFFE
23:877  0:000  first CPU found at 82A2 offset 82A5
23:877  0:000  score candidate at 829E
23:877  0:000  score inserted in acpi_cpu_score _PR_
23:877  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
23:877  0:000  Found PCIROOTUID = 0
23:877  0:000  Start RTC Fix
23:877  0:000  found RTC Length not match, Maybe will cause CMOS reset will patch it.
23:877  0:000  found RTC had IRQNoFlag will move -3 bytes
23:877  0:000  ...len=AD74
23:877  0:000  new size written to 235D shift=0 len=AD74
23:877  0:000  len after correct outers AD74
23:877  0:000  Start PIC Fix
23:877  0:000  PIC size=A5 at 2209
23:877  0:000  found CRS at 221D size 8D
23:877  0:000  found PIC had IRQNoFlag will move -3 bytes
23:877  0:000  Fix Device PIC size -3
23:877  0:000  Start HPET Fix
23:878  0:000  Start Display0 Fix
23:878  0:000  Found internal video device FFFF@478D, unusable
23:878  0:000  Creating Method(_DSM) for 10DE card
23:878  0:000  patch Display #0 of Vendor=0x10DE
23:878  0:000  Start NetWork Fix
23:878  0:000  found NetWork device [0x001C0006:0] at 4608 and Name is PXSX
23:878  0:000  NetworkADR1=1C0006 NetworkADR2=0
23:878  0:000  network DSM created, size=4D
23:878  0:000  patch HDEF in DSDT
23:878  0:000  Start HDA Fix
23:879  0:000  found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
23:879  0:000  NewName HDEF already present, renaming impossible
23:879  0:000  _DSM already exists, patch HDA will not be applied
23:879  0:000  Start Add IMEI
23:879  0:000  Start HDMI13 Fix
23:879  0:000  have no HDMI device while HDMIADR2=1
23:879  0:000  HDMIADR1=10000 HDMIADR2=1
23:879  0:000    with default properties
23:879  0:000   deleting device CRT_
23:880  0:000   deleting device DVI_
23:880  0:000   deleting device SPKR
23:880  0:000   deleting device ECP_
23:880  0:000   deleting device LPT_
23:880  0:000   deleting device FDC0
23:880  0:000   deleting device ECP1
23:881  0:000   deleting device LPT1
23:881  0:000  Start PNLF Fix
23:881  0:000  found PWRB at 4B36
23:881  0:000  Start _S3D Fix
23:881  0:000    indirect name=SRCB
23:881  0:000  Start ADP1 fix
23:882  0:000  no device(AC) exists
23:882  0:000  Start SHUTDOWN Fix len=ADFB
23:882  0:000  PreCleanup XSDT: count=7, length=92
23:882  0:000  PreCleanup XSDT, corrected XSDT: count=7, length=92
23:882  0:000  === [ ACPIDropTables ] ====================================
23:882  0:000  Drop tables from XSDT, SIGN=SSDT TableID=CpuPm Length=2706
23:882  0:000   Table[6]: SSDT  CpuPm  2706 dropped
23:882  0:000  Drop tables from XSDT, SIGN=SSDT TableID=Cpu0Ist Length=2474
23:882  0:000   Table[5]: SSDT  Cpu0Ist  2474 dropped
23:882  0:000  === [ DropSSDT ] ==========================================
23:882  0:000  Drop tables from XSDT, SIGN=SSDT TableID= Length=0
23:882  0:000   Table[4]: SSDT  SataTabl  877 dropped
23:882  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4
23:882  0:000  Maximum control=0x1F
23:882  0:000  Turbo control=0x23
23:882  0:000  P-States: min 0x7, max 0x23
23:882  0:000  SSDT with CPU P-States and plugin-type generated successfully
23:882  0:000  SSDT with CPU C-States generated successfully
23:882  0:000  Cleanup XSDT: count=9, length=108
23:882  0:000  corrected XSDT count=6, length=84
23:882  0:000  === [ RestSetup macOS ] ===================================
23:882  0:000  EdidDiscovered size=128
23:882  0:000  ---Discovered EDID Table size:128
23:882  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  04  69
23:882  0:000  010  |  A2  24  55  2C  00  00  12  14  01  03
23:882  0:000  020  |  80  34  1D  78  2A  C7  20  A4  55  49
23:882  0:000  030  |  99  27  13  50  54  BF  EF  00  71  4F
23:882  0:000  040  |  81  40  81  80  95  00  B3  00  D1  C0
23:882  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
23:882  0:000  060  |  2D  40  58  2C  45  00  09  25  21  00
23:882  0:000  070  |  00  1E  00  00  00  FF  00  41  35  4C
23:882  0:000  080  |  4D  54  46  30  31  31  33  34  39  0A
23:882  0:000  090  |  00  00  00  FD  00  37  4B  1E  55  10
23:882  0:000  100  |  00  0A  20  20  20  20  20  20  00  00
23:882  0:000  110  |  00  FC  00  41  53  55  53  20  56  48
23:882  0:000  120  |  32  34  32  0A  20  20  00  60
23:882  0:000  --- Patched EDID size:128
23:882  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  04  69
23:882  0:000  010  |  A2  24  55  2C  00  00  12  14  01  03
23:882  0:000  020  |  80  34  1D  78  2A  C7  20  A4  55  49
23:882  0:000  030  |  99  27  13  50  54  BF  EF  00  71  4F
23:882  0:000  040  |  81  40  81  80  95  00  B3  00  D1  C0
23:882  0:000  050  |  01  01  01  01  02  3A  80  18  71  38
23:882  0:000  060  |  2D  40  58  2C  45  00  09  25  21  00
23:882  0:000  070  |  00  1E  00  00  00  FF  00  41  35  4C
23:882  0:000  080  |  4D  54  46  30  31  31  33  34  39  0A
23:882  0:000  090  |  00  00  00  FD  00  37  4B  1E  55  10
23:882  0:000  100  |  00  0A  20  20  20  20  20  20  00  00
23:882  0:000  110  |  00  FC  00  41  53  55  53  20  56  48
23:882  0:000  120  |  32  34  32  0A  20  20  00  60
23:882  0:000  mem_detected 2048Mb
23:882  0:000  read_nVidia_ROM
23:882  0:000  Using PRAMIN fixups
24:023  0:140  PROM
24:230  0:207  version 80.06.3C.00.11
24:230  0:000  nVidia MSI GeForce GTX 650 Ti  2048MB NVE6 [10DE:11C6] :: PciRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0) => device #1
24:230  0:000  Nvidia: VideoPorts: undefined, default to: 2
24:230  0:000  set NVCAP: 04000000-00000300-0C000000-00000007-00000000
24:230  0:000  stringlength = 3898
24:230  0:000  CurrentMode: Width=1024 Height=768
24:230  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DB3D9098
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DB3D9098
24:232  0:001  Use origin smbios table type 1 guid.
24:235  0:003  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
24:235  0:000  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1765)
24:242  0:006  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.13
24:242  0:000  Extra kext: EFI\CLOVER\kexts\10.13\VoodooHDA.kext (v.2.8.9)
24:253  0:010  Extra kext: EFI\CLOVER\kexts\10.13\USBInjectAll.kext (v.0.6.3)
24:487  0:233  Extra kext: EFI\CLOVER\kexts\10.13\GenericBrightness.kext (v.1)
24:492  0:005  Extra kext: EFI\CLOVER\kexts\10.13\FakePCIID_XHCIMux.kext (v.1.3.9)
24:499  0:007  Extra kext: EFI\CLOVER\kexts\10.13\FakePCIID.kext (v.1.3.9)
24:505  0:005  Extra kext: EFI\CLOVER\kexts\10.13\AtherosE2200Ethernet.kext (v.2.2.2)
24:512  0:007  Custom boot screen not used because entry has unset use graphics
Merci  oui
A oui il est plus rapide!  +1   plane
Ont vois bien que tes Drivers sont bien la
Loading AptioInputFix-64.efi status=Success
0:224  0:001  Loading PartitionDxe-64.efi  status=Success
0:225  0:000   - driver needs connecting
0:225  0:000  Loading SMCHelper-64.efi  status=Success
0:226  0:000  Loading VBoxHfs-64.efi  status=Success
0:227  0:000   - driver needs connecting
0:227  0:000  Loading APFS.EFI  status=Success
0:233  0:006   - driver needs connecting
0:233  0:000  Loading HFSPlus.efi  status=Success
0:235  0:001   - driver needs connecting
0:235  0:000  Loading AptioMemoryFix-64.efi status=Success

clin d'oeil Ecoute cest un Fork du AptioFix2 et la premier chose qu'il fait cest de reconnaître le Boot EFI Parfaitement, ce que le vieux Drivers de 2012 ne fesait pas toujours ha4
Et les Autres Future sont assez incroyable, a tu vue sur le Site GitHib en quoi cela consiste  study
De plus il est Developer a l'extérieur de Clover +1 et seras developer en temp réele!
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Lun 15 Jan - 6:01

Caractéristiques (par rapport à l'original)

Recherche automatiquement la zone de mémoire disponible pour boot.efi à utiliser
Implémente le support KASLR pour les systèmes où certaines diapositives ne peuvent pas être utilisées
Ajoute un support en mode sans échec sur les systèmes avec des adresses inférieures utilisées
Garantit qu'aucun argument de diapositive ne fuit vers le système d'exploitation
Tente de gérer plus correctement les mappages de mémoire
Implémente un nouveau code de mappage lors de l'éveil de l'hibernation (toujours pas assez stable)
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par chris1111 Jeu 18 Jan - 16:42

Update 18 JAN 2018
Clover Créateur-V4
Option 1 Default  EDK2 26114

Clover Créateur-V10 - Page 3 Captu255
chris1111
chris1111
Admin
Admin

Date d'inscription : 18/12/2012
Localisation : Laval. Québec Canada

https://www.hackintosh-montreal.com

Revenir en haut Aller en bas

Clover Créateur-V10 - Page 3 Empty Re: Clover Créateur-V10

Message par Contenu sponsorisé


Contenu sponsorisé


Revenir en haut Aller en bas

Page 3 sur 40 Précédent  1, 2, 3, 4 ... 21 ... 40  Suivant

Revenir en haut

- Sujets similaires

 
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum