(SOLVED) usb problem after post install 4540s

Rappel du premier message :

HP 4540s
Intel i5 3210m

I tried to use Install Media guide, but I had some problem, because I need to create usb install.
So I used this command
sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/macOS
After command done, I used Install Media step 2, create clover for my usb flash.
So I intalled 10.13 from usb.
After I used post Post Installer.

And now I have problem.
I launch Mac OS from clover and my usb devises not working.
But if I use clover from flash drive,  keyboard, touchpad, usb devises work good.

Sorry for my English..

Mediatek Bluetooth Adaptor
ID
USB\VID_148F&PID_3298&REV_0000

MixProTim a écrit:Mediatek Bluetooth Adaptor
ID
USB\VID_148F&PID_3298&REV_0000

What is the Wifi you have ?
Wifi works?

RT3290
No, it's not working.

MixProTim a écrit:RT3290
No, it's not working.

Bluthoot Integrate or USB Bluthoot ?

Bluthoot Integrate
I just want to do my fn buttons work, like change brightness or volume.
This thing worked with post installer clover.

MixProTim a écrit:Bluthoot Integrate
I just want to do my fn buttons work, like change brightness or volume.
This thing worked with post installer clover.

Brightnes work, I patch DSDT for Brightness, used the last DSDT

I dowland it again and move to patched.
I use the last one. usb is working good now.
But fn buttons don't.

MixProTim a écrit:I dowland it again and move to patched.
I use the last one. usb is working good now.
But fn buttons don't.

Brighness work in preference System / Monitor ?

Yes

MixProTim a écrit:Yes

What do you want to say FN Bluetooth?

I didn't say anything about FN Bluetooth.
I said that fn buttons not work.
From fn buttons work only two f7(volume off) and f11(play/pause)

MixProTim a écrit:I didn't say anything about FN Bluetooth.
I said that fn buttons not work.
From fn buttons work only two f7(volume off) and f11(play/pause)

Ha OK Sorry
let me watch the DSDT

OK Here ENJOY  

Okay, they are working.
But I don't need to press fn, like fn+f2.
Just press f2 and brightness change.
Is it good?)))

MixProTim a écrit:Okay, they are working.
But I don't need to press fn, like fn+f2.
Just press f2 and brightness change.
Is it good?)))

Yes is good,
My Brighnes is F9  and  F10
F9 For Down F10 for Up

And you don't need to press fn??

MixProTim a écrit:And you don't need to press fn??

NO

Your Bluthoot its Not Broadcom ??

No.
I think os is working good now.... Thank you!!!)
So how to install windows
with Boot camp
or like simple usb install?

Windows Create UEFI installer here on macOS
https://www.hackintosh-montreal.com/t6792-creation-usb-windows-10-uefi-dans-macos

---

If you want Create USB Installer Create Install Media in macOS
Used the installer , its the Best of the Best, Clover is always Update on thie programme  
https://www.hackintosh-montreal.com/t7279-clover_v2-4k_special-edition-v5

Okay, thank you very match. This is the best support what I can have..)

Your Welcome